174+ Flat Roof House Plans With Pictures

unsplash.com

```html

Opening: Prepare to Build Your Own Simple Birdhouse!

Want to attract more feathered friends to your yard? Building a birdhouse is a fun and rewarding project. This guide provides simple, step-by-step instructions to create a basic birdhouse using readily available materials. Let's get started!

Materials You'll Need:

• Wood: A single, untreated plank of wood (pine or cedar recommended) approximately 6 inches wide and 6 feet long.
• Saw: Hand saw or power saw.
• Drill: With various sized drill bits.
• Screws or Nails: Exterior grade.
• Measuring Tape or Ruler: For accurate cuts.
• Pencil: For marking measurements.
• Sandpaper: To smooth rough edges.
• Safety Glasses: Protect your eyes!
• Optional: Exterior paint or sealant (non-toxic).

Step-by-Step Instructions:

Step 1: Cutting the Wood

• Cut the wood according to the following dimensions. These dimensions are suggestions; adjust them to your preference, keeping in mind bird size.
• Front: 6 inches wide x 8 inches high
• Back: 6 inches wide x 10 inches high (the extra 2 inches will create an overhang for mounting)
• Sides (2 pieces): 6 inches wide x 7 inches high (cut with a slight angle on the top to create a sloping roof)
• Bottom: 6 inches wide x 5 inches deep
• Roof (2 pieces): 6 inches wide x 7 inches deep

Step 2: Assemble the Box

• Attach the sides to the bottom piece using screws or nails. Make sure the bottom piece is flush with the sides.
• Attach the front to the sides and bottom.
• Attach the back to the sides and bottom. Ensure the extra 2 inches of the back panel extend upwards.

Step 3: Create the Entrance Hole

• Using a drill and a appropriately sized drill bit (1 1/2 to 2 inches in diameter is good for many common birds), drill an entrance hole in the front of the birdhouse. Position the hole approximately 2 inches from the top.

Step 4: Attach the Roof

• Attach the roof pieces to the top of the birdhouse. Ensure they overhang the sides slightly. Secure with screws or nails.

Step 5: Sanding and Finishing

• Sand all rough edges of the birdhouse to prevent splinters.
• If desired, paint or seal the birdhouse with a non-toxic exterior grade product. Avoid painting the inside. Bright colors may deter birds. Neutral tones are generally best.

Step 6: Mounting the Birdhouse

• Drill holes through the extended portion of the back piece.
• Mount the birdhouse to a tree, post, or side of a building, ensuring it is securely fastened. A location that is sheltered from harsh weather and predators is ideal.

Conclusion: Enjoy Your New Birdhouse!

Congratulations! You have successfully built your own birdhouse. Now, sit back and enjoy watching the birds move in and make it their home. Remember to clean the birdhouse out annually after nesting season is over. Happy birding!

```

Best 20+ Flat Pictures & Images

unsplash.com

Flat On Behance

www.behance.net

100+ Flats Pictures

unsplash.com

Share this