45+ Shed Roof Lake House Plans

www.homedepot.com

```html

Opening: Building a Simple Shed Roof Birdhouse Want to attract feathered friends to your backyard? A DIY birdhouse is a rewarding project that's both fun and beneficial for local birds. This guide will walk you through building a simple birdhouse with a classic shed roof design. It's perfect for beginners and requires minimal tools and materials.

Materials You'll Need:

• Untreated wood (pine, cedar, or redwood are good choices) approximately 1" x 6" x 6 feet
• Wood glue
• Small nails or screws (1" to 1 1/4")
• Drill with various sized bits
• Saw (hand saw, circular saw, or jig saw)
• Measuring tape or ruler
• Pencil
• Sandpaper

Step-by-Step Instructions:

Step 1: Cut the Wood Pieces Using your measuring tape and pencil, mark the following dimensions on your wood. These dimensions are approximate and can be adjusted based on your desired birdhouse size.

• Front: 6" wide x 8" high
• Back: 6" wide x 10" high
• Sides (2 pieces): 6" wide x 7" high (tapering to 5" high on one side)
• Bottom: 4" wide x 6" long
• Roof (2 pieces): 4" wide x 7" long

Carefully cut each piece using your chosen saw. Remember to prioritize safety while cutting!

Step 2: Drill the Entrance Hole and Ventilation On the front piece, drill an entrance hole approximately 2" in diameter. Position it about 2" to 3" from the top of the front piece. The appropriate hole size will vary depending on the type of bird you want to attract; research appropriate hole sizes for your target species. Drill small ventilation holes (1/4" diameter) near the top of each side piece. These are important for air circulation. Drill drainage holes (1/4" diameter) in the bottom piece to prevent water from accumulating.

Step 3: Assemble the Box Apply wood glue to the edges of the bottom piece. Attach the front, back, and side pieces to the bottom, forming a box. Ensure the taller side of the back piece is facing upwards (this creates the slope for the roof). Secure the pieces with nails or screws. Pre-drilling pilot holes can help prevent the wood from splitting.

Step 4: Attach the Roof Apply wood glue to the top edges of the front, back, and side pieces. Attach the roof pieces, overlapping them slightly at the top to create a slight overhang. Secure the roof pieces with nails or screws.

Step 5: Sand and Finish (Optional) Sand down any rough edges or splinters to ensure the birdhouse is smooth and safe for its future inhabitants. If desired, you can paint or stain the birdhouse with non-toxic, water-based paints or stains. Avoid using bright colors, as these can deter birds. Natural colors like brown, green, or gray are best. Make sure the paint or stain is completely dry and odorless before installing the birdhouse. Never paint the inside of the birdhouse.

Conclusion: A Home for Your Feathered Friends Congratulations! You've built a simple shed roof birdhouse. Now, find a suitable location to mount your birdhouse, ideally on a pole or tree branch, away from predators like cats. Clean the birdhouse out once a year after nesting season. Enjoy watching the birds move in and make your birdhouse their home!

```

Cedar Shed Cubby

decorativewooden.blogspot.com

Shed Building Faq

shedshelvingplans.blogspot.com

Handy Home Products Do-it Yourself Princeton Premier 10 Ft. W X 10 Ft

www.homedepot.com

Share this