182+ Storage Shed Rubbermaid

storage-anywhere.com

Opening: Building Your Own 182+ Cubic Foot Storage Shed (Rubbermaid Alternative) Are you tired of clutter in your garage or backyard? Ready to organize your life with a spacious and durable storage solution? While Rubbermaid sheds offer convenience, building your own allows for customization and potentially cost savings. This guide will walk you through the process of creating a similar-sized storage shed from scratch. Get ready to roll up your sleeves and build something awesome!

Step 1: Planning and Design Before you start hammering, a solid plan is crucial.

Determine Size and Location: Decide on the dimensions of your shed. Aim for approximately the same internal volume as a Rubbermaid 182+ cubic foot shed (e.g., 7ft x 7ft x 7ft). Consider your available space, local building codes, and intended use. Choose a level location with good drainage.

Create a Sketch and Material List: Draw a detailed sketch of your shed, including the dimensions of walls, roof, door(s), and window(s) (if desired). Based on your sketch, create a comprehensive material list. This will typically include:

• Pressure-treated lumber for the base and framing
• Sheathing (plywood or OSB) for walls and roof
• Roofing materials (shingles, metal roofing, etc.)
• Screws, nails, and other fasteners
• Door(s) and hardware (hinges, latch, handle)
• Window(s) and hardware (if desired)
• Caulk, sealant, and paint/stain

Check Local Building Codes: Contact your local building department to understand permit requirements and any specific regulations for shed construction in your area. This is important to avoid fines and ensure your shed meets safety standards.

Step 2: Building the Base A solid base is essential for a long-lasting shed.

Prepare the Site: Clear the chosen location of grass, debris, and topsoil. Level the ground using a shovel and rake.

Build the Frame: Construct a rectangular frame from pressure-treated lumber. Ensure the frame is square and level. A common method is to use 4x4 posts as corner supports and 2x6 lumber for the perimeter frame.

Add Floor Joists: Install floor joists within the frame, typically spaced 16 inches on center (OC). These will support the flooring.

Attach Flooring: Cover the frame with plywood or OSB to create the floor. Secure the flooring to the joists with screws.

Step 3: Framing the Walls Now, it's time to build the walls.

Cut Wall Studs: Cut wall studs to the desired height of your shed. Remember to account for the thickness of the top and bottom plates.

Assemble Wall Frames: Assemble each wall frame by attaching the studs to the top and bottom plates. Maintain consistent spacing (typically 16 inches OC). Frame out openings for the door(s) and window(s) (if desired).

Raise and Secure Walls: Carefully raise each wall frame and secure it to the base using screws or nails. Ensure the walls are plumb (vertical) and square. Use temporary bracing to hold them in place until they are fully secured.

Connect Walls: Connect the wall frames to each other at the corners using screws or nails. This will create a strong and stable structure.

Step 4: Installing Sheathing Sheathing provides structural support and a surface for attaching siding.

Cut Sheathing Panels: Cut plywood or OSB sheathing panels to fit the exterior of the walls.

Attach Sheathing: Attach the sheathing panels to the wall frames using screws or nails. Ensure the panels are properly aligned and that all edges are secured to the studs.

Cut out Door and Window Openings: If you have already installed the sheathing, carefully cut out the openings for the door(s) and window(s).

Step 5: Building the Roof The roof protects your shed from the elements.

Build Rafters or Trusses: Construct rafters or trusses to support the roof. You can either build them yourself or purchase pre-fabricated trusses. The type of roof (gable, shed, etc.) will determine the specific design.

Install Rafters/Trusses: Secure the rafters or trusses to the top plates of the walls. Ensure they are properly spaced and aligned.

Install Roof Sheathing: Cover the rafters or trusses with plywood or OSB sheathing.

Install Roofing Material: Install your chosen roofing material (shingles, metal roofing, etc.) according to the manufacturer's instructions. This is crucial for preventing leaks.

Step 6: Installing Door(s) and Window(s) Now, it's time to add access and light.

Install Door Frame: Install the door frame in the framed opening. Ensure it is plumb and square.

Hang the Door: Attach the door to the frame using hinges. Install the latch and handle.

Install Window Frame: If you're including windows, install the window frame in the framed opening.

Install the Window: Install the window into the frame, following the window manufacturer's instructions.

Step 7: Finishing Touches These final steps will make your shed look great and last longer.

Add Siding (Optional): If desired, add siding to the exterior walls for a more finished look. Options include wood siding, vinyl siding, or metal siding.

Caulk and Seal: Caulk all seams and gaps to prevent water intrusion.

Paint or Stain: Paint or stain the shed to protect the wood and enhance its appearance.

Install Shelving and Organization: Add shelving, hooks, or other organizational features to maximize storage space.

Conclusion: Enjoy Your New Storage Space! Congratulations! You've successfully built your own 182+ cubic foot storage shed. By following these steps, you've created a customized and durable storage solution that will keep your belongings organized and protected for years to come. Remember to regularly inspect your shed for any signs of damage and perform maintenance as needed to ensure its longevity.

How To Buy A Storage Unit

www.holdstorage.co.uk

Archive Storage At Kangaroo Self Storage

www.kangarooselfstorage.co.uk

Storage Anywhere

storage-anywhere.com

Share this